Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Problems with connecting NMEA 4800 streams.

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 18/01/2019 at 7:24 pm #13505
    Anonymous

      Hi. Bought a QK-A031 this week.

      Problems with connecting NMEA 4800 streams.

      AMEC AIS with 9600 baud works fine. The lead flashes and I can read the messages on NMEA out (Hyperterminal)

      When connecting Simrad AT10 Universal Converter NMEA 0183 brigde (Baud settings 4800) The led does not flash

      The same problem when I connect a standard GPS (Baud settings 4800)

      No output to Hyperterminal

      Any hints?

      21/01/2019 at 2:04 pm #14274
      Quark Elec

        Hello

        This is very odd but im sure we can find the answer to this. At first thought I think it is to do with the voltage levels of the equipment. Could you please explain how everything is connected in your setup so I can understand where the issue may lie? For example

        Standard GPS (rs232) >>> QK-A031 (rs422)>>>Simrad AT10 universal converter>>>N2K bus>>>MFD.

        Please tell me the make and models and we can go from there.

        Best regards

        Joshua

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Cart