Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › A034 PCDIN—solved

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 11/02/2021 at 10:25 pm #15233
    Anonymous

      The A034 manual section 3.6, and the set-up guide, indicate that $PCDIN messages are output on WiFi and USB. When I capture raw data from either WiFi or USB I do not see any $PCDIN messages at all.
      While it adds to the traffic, it would be useful for debugging problems I’m having with the A034 NMEA2000 data.
      Is there a switch to turn it on?

      12/02/2021 at 10:31 am #15239
      Quark Elec

        Hi, I agree the PCDIN is very helpful for investigate the N2K backbone issues thats why PCDIN format data has been supported. Can you check it with the configuraition tool please. The PCDIN and NMEA 0183 data should be shown on the windows. It will be very helpful if you can provide your firmware version information as well.

        15/02/2021 at 3:11 pm #15259
        Quark Elec

          Hi，the latest version is A034_V1.10.210222_FC13.bin, which can be download from website. Can you try to upgarde your firmeware to be the latest verson please.

          25/02/2021 at 11:11 am #15512
          Quark Elec

            sorry I should also mention here that the latest configuration tool is needed to support this function.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.
          Cart