1. Home
  2. Marine Electronics
  3. A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi - Image 2
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi - Image 3
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi - Image 4
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi - Image 5
A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi - Image 6

A032 NMEA 2000/0183 Bi-directional Gateway + USB + WiFi

$193.87 ($161.56 excl. VAT)

  • NMEA 2000® certified product
  • Connects and converts NMEA 0183 to NMEA 2000 and vice versa
  • WiFi access to your combined data both with or without a router
  • USB connection and compatible with Android, iOS, Windows and Linux

In stock (can be backordered)

Description

Description

Description

The A032 NMEA 0183 to NMEA 2000 bi-directional gateway provides straight forward connection of NMEA 0183 equipment to NMEA 2000 networks and vice versa.

The Bi-directional gateway will let you:

  • Connect NMEA 0183 equipment to your NMEA 2000 bus
  • Convert NMEA protocols in both directions, 0183 to 2000 and 2000 to 0183
  • View the combined data through a chart plotter or USB and WiFi to your laptop, tablet or smart phone

Connect NMEA 0183 equipment to the high-speed world of N2K networking. Cross-protocol connectivity and conversions allows you to use both NMEA protocols on your boat.

Full conversion list in the manual.

Features

Feature Description
NMEA 0183 → NMEA 2000 Converts the most common NMEA 0183 sentences into NMEA 2000 PGNs
NMEA 2000 → NMEA 0183 Converts the most common NMEA 2000 PGNs into NMEA 0183 sentences
NMEA Output Options WiFi/USB NMEA message output
Installation Pre-fitted cables for ease of installation
WiFi Modes Supports ad-hoc (peer-to-peer) and station mode (via router)
Baud Rate Configurable; default is 38400bps (set via configuration software)
Isolation Galvanic opto-isolation on NMEA 0183 input and NMEA 2000 bus
Firmware Free firmware updates with new features and conversions
Compatibility Windows, Mac, Linux, Android, iOS (iPhone via USB OTG); initial configuration requires Windows
RS232 Compatibility Connects to older RS232 devices with optional Protocol Bridge (AS03)

Check the table in the manual for the sentences/PNGs that your equipment requires.

Available to add to your order

Protocol Bridge?

NMEA 2000 Network Essentials:

Downlaods

Downlaods

Document TypeLink
Set Up Guide
User Manual
Driver
Firmware
Configuration Tool
What's in the box?

What's in the box?

What’s Included?

  • 1 x A032
  • 1 x Micro USB Cable (not pictured)
  • 1 x WiFi Antenna (not pictured)
  • 1 x setup guidebook

Product Videos

Product Videos

Unboxing

 

How to Configure

AIS Receiver comparison guide

AIS Receiver comparison guide

Compare NMEA Multiplexers

Compare NMEA Multiplexers

Compatible Applications

Compatible Applications

Name of APP iPhone Android Mac PC Linux
Open CPN ✅ ✅ ✅ ✅
Navionics ✅ ✅
Seanav ✅ ✅
Boat Beacon ✅ ✅
SeaPilot ✅ ✅
Belfield Chartplotter ✅ ✅
iRegatta ✅ ✅
iSailor ✅ ✅
Marine Traffic ✅ ✅ ✅ ✅
SEAiq ✅ ✅ ✅ ✅
AIS Radar ✅
Imray Navigator ✅
iNavX ✅ ✅
COAA Shiplotter Parallels/Boot Camp ✅ Wine
NMEA remote app ✅
PCPLOTTER Parallels/Boot Camp  ✅
NavigationPLANNER Parallels/Boot Camp  ✅
FAQ

FAQ

FAQ – How to connect NMEA0183 RS422 to older RS232 devices.

This product uses the NMEA 0183-RS422 protocol (differential signal), however some older chart plotters or instruments may use the older NMEA-RS232 protocol (single-ended signal).

To ensure A032 compatibility with any older NMEA0183 device, check if your device uses NMEA0183 RS422 or RS232

  • NMEA0183 RS422 devices’ wiring is compatible ‘out of the box’
  • NMEA0183 RS232 will require a Protocol Bridge (AS03) to connect your wiring

 

Connecting the A032 to an older (RS232) instrument or chart plotter is not a problem, simply order the QS03 Protocol Bridge. Our AS03 Protocol Bridge connects NMEA-RS232 wiring to MNEA0183-RS422 and vice versa, using a simple ‘plug ‘n’ play’ connection, with no setup or configuration needed.

You will probably need an AS03 if you are connecting to an older Garmin, Raymarine or Standard Horizon device. The easiest way to check is to look at the input/output connections on the device that you will connect the multiplexer to. If the input/output connections on your device (chart plotter, depth reader, etc.) have a TX, RX or GND connection, use a protocol bridge.

If in doubt contact us for advice.

You may also like…
Related products
Cart