Multiple GPS on NMEA

Quark-elec AIS receiver and NMEA MUX products questions

Multiple GPS on NMEA

Postby rob59 » Mon Sep 11, 2017 12:57 pm

Hello, I installed a QK-A031 and a QK-A026, the multiplexer receives input from the Seatalk bus, from the QK-A026 and from a Garmin GPS chart plotter.
The problem is how to let the QK-A026 and the Garmin GPS coexist (the are both sending GPS NMEA sentences) since:

1) I need the AIS sentences from QK-A026
2) At the same time I need the information about waypoints, routes, ecc. from the Garmin
3) I need GPS data from one of the 2 sources

The best solution would be a firmware option to disable sending of GPS sentences from QK-A026 on the NMEA bus (so it would be possible to use at the same time the GPS and AIS informations provided on the QK-A026 WiFi connection to feed a tablet).

If this is not possible, is it possible to disable (via hardware or, better, via software) the GPS contained into QK-A026, or to filter the GPS sentences from one input port of the QK-A031?

Thanks, regards.
Posts: 1
Joined: Mon Sep 11, 2017 12:25 pm

Re: Multiple GPS on NMEA

Postby admin » Mon Sep 11, 2017 2:16 pm

It looks like QK-A024 is the right part you should have. Unfortunately, the GPS output from A026 cannot be disabled.
As far as we know A026 and other GPS receiver can be co-existing on the system, but you maybe see he position icon wobbly sometimes.
User avatar
Site Admin
Posts: 340
Joined: Tue May 13, 2014 2:50 pm

Re: Multiple GPS on NMEA

Postby Lukerandolph » Tue Sep 12, 2017 11:41 pm

Posts: 3
Joined: Sun Sep 10, 2017 4:22 pm

Return to Marine Electronics(AIS/NMEA MUX)

Who is online

Users browsing this forum: No registered users and 1 guest