Quark-elec NMEA Marine electronics Forums Remote Control Solution/Products Remote MonitoringDatalogging of Freezer units

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13545
    Anonymous

      Hello,

      Not actually purchased a unit(s) yet but am looking at a few QK-W016 WiFi Temperature Controller with 3 Sensors or QK-W017 WiFi Control System with Temperature / Humidity Sensors.

      My intention is to use the unit(s) for remote logging of 2 walking-in fridgefreezers with a normal temperature range of +4 to -22 C, ideally the sensors should be waterproof.

      The two walk-in units are 10 meters apart so would need long lead sensors. Ideally we would like one temperature and one door open reed switch sensor, to notify us via a App or email if a door is left open or if the temperature range is too high or low.

      The Venue has PoE and a WiFi router installed, we would like to connect to the wifi.

      Would the above unit(s) be suitable for my useage plan.

      Many thanks

      Mike

      #14437

      Thanks for your enquirers. It looks like you need our QK-W016 since it support up to 3 zones. You can monitor/log and control the temperature. Make sure you select 6 meters cable since two units are 10 meters away. Thanks.

    Viewing 2 posts - 1 through 2 (of 2 total)
    • You must be logged in to reply to this topic.
    Cart