Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Quark AO28 to Raymarine Elements
- This topic has 1 reply, 2 voices, and was last updated 1 year, 11 months ago by Anonymous.
-
AuthorPosts
-
11/05/2022 at 8:14 pm #19159Anonymous
Can anyone help me?
I have recently purchased a Quark AO28 to connect to my Raymarine Elements HV through NMEA2000. I can see the system connected in the diagnostic screen and can also swap GPS input from internal to Quark. The problem i have is two fold. One i only, on occasion get a ‘find ship’ option in my chart screen. If i press it nothing happens, it just zooms into my gps location. The second problem i have is it is not showing any AIS vessels. I get a strong red light and green GPS light. I get regular ‘dull ish’ AIS lights.
Raymarine inform me there should be an option under layers (via the three cogs on the chart screen) but there is nothing there.
Any help would be greatly appreciated.
16/05/2022 at 5:27 pm #19195AnonymousYou should be able to find it out from ‘data source’ or similar tab from the menu. It workes with my Raymarine Axiom.
-
AuthorPosts
- You must be logged in to reply to this topic.