Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › QK-A028 NMEA 2000 Interference?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 15/01/2021 at 9:48 pm #13638
    Anonymous

      I have the QK-A028 connected to a Lowrance Elite TI2 via NMEA2000. When I power on the Lowrance, the “AIS RX” LED on the ‘028 comes on and starts “fluttering” dimly. It does this with the antenna disconnected as well. It will receive AIS messages, but doesn’t seem to have much range. Does anyone know if the LED is an indicator of only valid AIS messages? Or does it come on when the squelch is broken?

      17/01/2021 at 1:58 pm #14699
      Quark Elec

        Thanks for your information. The AIS RX LED indicates valid AIS messages received. Regarding the range, I hope the following link could be a help.

        https://www.quark-elec.com/doc/data/HOW_TO_MAXIMISE_YOUR_AIS_RECEPTION_p.pdf

        20/01/2021 at 9:57 pm #14700
        Anonymous

          admin wrote:


          Thanks for your information. The AIS RX LED indicates valid AIS messages received. Regarding the range, I hope the following link could be a help.

          https://www.quark-elec.com/doc/data/HOW_TO_MAXIMISE_YOUR_AIS_RECEPTION_p.pdf

          Can I access the raw data from the internal receivers? Such as RSSI?

          25/02/2021 at 11:20 am #15514
          Quark Elec

            Unfortunately, this isn’t something we can provide. Thank you for the understanding.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.
          Cart