Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › QK-A016 battery monitor
- This topic has 1 reply, 2 voices, and was last updated 1 year, 11 months ago by Technical Team.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
12/04/2022 at 1:07 pm #18999Anonymous
Interested in this (particularly the 0183 output) but 1 have a 1500w inverter on board and am concerned that a 100amp shunt will be too small. Any chance of using it with a larger shunt?
19/04/2022 at 11:56 am #19032Hi, What is the voltage your devices are using, 12V or 24V? The A016 can only stand with up to 100Amp constant current. Higher than that could damage the shunt.
We do not recommend replacing the shunt because the battery monitor might display inaccurate data or the new shunt might cause damage to the battery monitor. Hope this helps.
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.