Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Matsutec transponder HA-102 connection to A031—–solved
- This topic has 1 reply, 2 voices, and was last updated 1 year, 3 months ago by Quark Elec.
-
AuthorPosts
-
16/01/2023 at 11:24 am #20440Anonymous
I am trying to make up Matsutec transponder, HA-102,for my iPhone via WiFi by your A031. Matsutec is working fine,transmitting etc connected to the serial port of the laptop. But I can only see AIS messages on my iPhone, no GPS. Can you help me?
16/01/2023 at 11:30 am #20442Matsutec transponders should work well with A031 with a proper connections and the right baud rate settings(GPS: 4.8k and AIS: 38.4k). The below image is one of our customer shared the connections with us. Hope it helps you as well.
Green(GPS output) —IN1-;
Organge( AIS output)—–IN3-;
IN1+ and IN3+ connect to GND.
The baud rate for input1 should be 4.8k, while input3 as 38.4k. -
AuthorPosts
- You must be logged in to reply to this topic.