Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › lowrance elite plotter—–solved
- This topic has 3 replies, 2 voices, and was last updated 1 year, 10 months ago by Anonymous.
Viewing 4 posts - 1 through 4 (of 4 total)
-
AuthorPosts
-
24/05/2022 at 3:13 pm #19241Anonymous
can I connect my lowrance elite plotter to my mux A031
24/05/2022 at 5:05 pm #19244Yes, it should work by swapping two NMEA wires:
+ —> – and – —-> +. Also please make sure the baud rate at each side should be the same.
24/05/2022 at 5:05 pm #19245Yes, it should work by swapping two NMEA wires:
+ —> – and – —-> +. Also please make sure the baud rate at each side should be the same.
25/05/2022 at 9:12 am #19254Anonymousthanks for the info
-
AuthorPosts
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.