Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Icom 500 to your A034– [SOLVED]

  • This topic has 2 replies, 2 voices, and was last updated 3 years ago by Anonymous.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 22/04/2021 at 8:42 am #16117
    Anonymous

      I mount and connect AIS icom 500 to quark elect A034, the app boating navionics 8 connect to wifi) dont receive the data of Ais… Can you help me?
      I connect 12 nmea3 out – from AIS to in – of Ao34 and 13 nmea3 out + to in + of A034, is correct?

      22/04/2021 at 8:45 am #16118
      Quark Elec

        Thank you for the information.
        After checking ICOM 500 manual, I don’t think NMEA3 provides AIS messages. Can you connect NMEA 2( 7and 8) to NMEA in of A034 please. Swap two wires if positive to positive, negative to negative doesn’t work.

        22/04/2021 at 8:47 am #16119
        Anonymous

          Hi yes. I swapped the wire positive to negative and now work Best regards.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.
        Cart