Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Connecting A034 in Station Mode not Working–solved
- This topic has 1 reply, 2 voices, and was last updated 3 years, 1 month ago by Quark Elec.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
19/03/2021 at 5:38 am #15853Anonymous
I am having an issue connecting an A034 in station mode to the router. I set the SSID, password, etc correctly (same as what other devices connect) as per the manual, repowered, but it just does not connect. I suspect it might be a security protocol issue. Is there a limited set of security protocols (security and encryption) that the A034 supports, and if so, what are the supported protocols? What else could be the issue? Thanks
22/03/2021 at 1:05 pm #15865A Very common issue customer have is the length of the pasword. A034 accepct 8 to 12 bit characters as password. Does this help? Thank you.
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.