Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › Connect Standard Horizon GX2100E via A034B—solved
- This topic has 1 reply, 1 voice, and was last updated 3 years ago by Anonymous.
-
AuthorPosts
-
25/03/2021 at 6:06 pm #15899Anonymous
My radio is not seeing the converted 0183 GPS output from my Raymarine chart plotter. I can see the GLL data packets arriving at the Ao34b using the config tool but I am unsure of the correct wiring connections.
The GX2100e offers:
Green -Nmea ground
Blue – Nmea GPS input + 4800 baud
Grey – Nmea DSC output +
Brown – Nmea High speed data output + 38400 baudForgetting the DSC and High speed for the moment, should I connect the green nmea ground to the A934 OUT -ve or to the COM connection?
Or do you have another solution?
28/03/2021 at 5:20 am #15908AnonymousWith advice from Quark-elec I connected the radio’s GPS input to the -ve Out port. This seems to work.
-
AuthorPosts
- You must be logged in to reply to this topic.