Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › EML-2 connect to A031, will it work?—-solved
- This topic has 1 reply, 1 voice, and was last updated 1 year, 9 months ago by Quark Elec.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
14/07/2022 at 11:58 pm #16848Anonymous
Dear Service Team,
I canot get my A031 work with EML-2, can you help me please. Can it work without the display?
Thank you.15/07/2022 at 12:03 am #19592Hi,
Can you please make sure the baud rate of A031 has been set to 4.8kbps. Please also check yoru connection as below:
SILVER/NEG —> NMEA input +
BLUE/NMEA —-> NMEA input –This should work well. You don’t have to get it work with the display connected. Good luck!
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.