Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › A027 depth signal k
- This topic has 4 replies, 2 voices, and was last updated 2 years, 12 months ago by Anonymous.
-
AuthorPosts
-
06/04/2021 at 10:22 am #15988Anonymous
Hi:
I bought an A027 to join my seatalk instrumentes to Signal K and Opencpn.
I have seen that opencpn (in nmea0183) receives well all datas but signal doesn’t receive depth.
Position, wind, speed ok in opencpn but not in Signal K I don’t receive the right path. I don’t see anything relative to the depth.
Have you seen this before?? Could you help me?
Thanks in advance.11/04/2021 at 8:26 am #16036AnonymousHi again:
I already have seen what it’s happenning.
A027 sends this signal: IIDBT,64.0,f,,M,,F*3F
I think that it should send something like this: IIDBT,64.0,f,19.5,M,10.7,F*3F
Is this wright?
Shouldn’t the A027 send the complete sentence?
Thanks in advance.
Joseba12/04/2021 at 2:18 pm #16042AnonymousHi Joseba,
Please use the contact form (https://www.quark-elec.com/contact-information/) and i will get right back to you regarding this issue.
If you could inform me which firmware version your AO27 is currently running that would be brilliant. You can find the firmware version by plugging your device into a computer running the Configuration Software – it will display the version across the bottom of the Configuration tool window.
Tech Support Team
15/04/2021 at 5:14 am #16051AnonymousOk. Thank you. I will send you the information and logs asap.
Joseba30/04/2021 at 4:49 pm #16232AnonymousHi:
Information sent.
Besides , I realize that I receive only apparent wind, no true wind.
I have sent you a log with all datas that I receive.
Also, the firmware version.
Thanks in advance. -
AuthorPosts
- You must be logged in to reply to this topic.