Quark-elec NMEA Marine electronics › Forums › Marine Electronics(AIS/NMEA Multiplexer) › A026-plus change NMEA0183 output port to input
- This topic has 1 reply, 2 voices, and was last updated 2 years, 7 months ago by Anonymous.
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
01/09/2021 at 5:29 pm #17092Anonymous
Hello,
I am considering A026-plus purchase and as I have two NEMA0183 devices it would be ideally to be able to connect both to the QE device. Thus I am wondering if maybe there is an option to programmatically change NMEA0183 output port function to input? Is it possible?
Marek
02/09/2021 at 9:32 am #17096AnonymousUnfortunately, there is no way to convert the NMEA 0183 output to NMEA 0183 input of the QK-A026-plus device. But you can use a bridge to add more devices to the QK-A026-plus device. I will recommend the QK-A031. This can be found under products in our website. (www.quark-elec.com).
-
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.