Tag Archives: Wireless Receiver

QK-W017 WiFi Remote Control Gateway – WiFi temperature/humidity data logger & remote controller

This week we have launched a new addition to our WiFi Remote Control Family.

Have complete control over your environment even when you aren’t there by fitting the QK-W017 wherever temperature and humidity are critical issues.

The base unit, or Gateway, communicates with up to 5 QK-S001 Sensor Units. These can monitor temperature, humidity or both and respond to preset limits by switching connected electronic devices on or off.  It must be paired with at least one S001 and can’t be used as a stand-alone-device.

Maintain energy efficiency at all times.

Upper and lower limits can be set independently for temperature and humidity so that the connected relay can operate the relevant electronic device when the parameters reach a set point.

Convenient access on the go.

Android or iOS handheld devices such as phones or tablets  can operate and monitor the W017 through an existing wireless access point (router)making it accessible over the internet from anywhere in the world (with a signal).  It also works locally in Ad Hoc or p2p mode.

Straightforward control  with a simple to use APP

After a  simple, rapid set-up you can be receiving data and controlling electronic devices within minutes, in up to five discrete zones.  The data can be logged and easily downloaded to the phone or tablet and opened for further analysis using the File Explorer. (It cannot as yet be directly exported to PC).

Change the APP labels to suit.

Each zone can be re-named with a unique label to instantly identify it, such as ‘garage’ or ‘fridge 1’ and can be changed whenever needed. Individual zones may be instantly monitored in real-time by clicking on their zone name on the Terminal Check page.

Change your mind.

Relay trigger points can be manually overridden at any point for instant operation of attached devices.  So if the temperature trigger is set for 17C to turn a heater on but it could do with a quick boost, just click and it’s done.

Detailed operating instructions are available at: http://www.quark-elec.com/manuals

Answers to frequently asked questions may be found on our forum at:

http://www.quark-elec.com/forum/viewforum.php?f=2&sid=da7e6b6f235be086c363ea248b52bd54

Buy now at:

http://www.quark-elec.com/onlinemall/index.php?route=product/product&product_id=88

Another Great Review for the QK-A031 Multiplexer

Test QK-A031 NMEA

The multiplexer is of quality and its price is incomparable! Commissioning is easy without having to load the interface for PC or Mac operation. The wifi works very well and especially, it allows several addresses at the same time on all platforms, PC, Mac, IIOS, Andro, Linux …. The must is the possibility to adjust the flow rate on all Inputs and outputs so as to be in phase with the AIS at 38500 Baud and the NMEA at 4800 Baud for seaTalk for example. Ultimately, the most would be to have NMEA 2000 … but to date the QK-A031 is of the best in NMEA183!

The original review in French:

Test QK-A031 NMEA en français

Le multiplexeur est de qualité et son prix est incomparable! La mise en service s’effectue sans difficulté à condition d’avoir chargé l’interface pour le piloter en PC ou en Mac. Le wifi marche très bien et surtout, il autorise plusieurs adresse en même temps sur toutes les plateformes, PC, Mac, IIos, Andro, Linux…. Le must c’est la possibilité d’ajuster au mieux le débit sur toutes les entrées et sorties de façon à être en phase avec l’AIS à 38500Bauds et du NMEA à 4800Bauds pour le seaTalk par exemple. A terme, le plus serait d’avoir du NMEA 2000… mais à ce jour le QK-A031 est de ce qui se fait de mieux en NMEA183!

You can find this review on

Tindie logo

 

Quark-elec wireless marine AIS receiver released(QK-A023)

QK-A023 AIS Wireless Receiver Work System

QK-A023 is a single channel marine AIS receiver, designed to be installed in a protected indoor environment for the small commercial, leisure, fishing boat and vessel monitoring markets in order to listen to other vessel’s AIS information. Patent protected Auto-hop Channel Algorithm(ACA) improves 4% of captured message rate. With embedded WiFi module, QK-A023 can send NMEA0183 data to nearby mobile devices wirelessly. The latter can be a smartphone, tablet , iPhone or iPad. More details can be found:

http://www.quark-elec.com/products/marine-electronics/144-qk-a023