Tag Archives: iOS

Updated AIS Receiver Quick Reference Chart

We have introduced two new products since the last Quick Reference chart was posted – QK-A031 Multiplexer, which has proved very popular and the newly released QK-A027 SeaTalk Converting AIS Receiver with GPS and WiFi.

 

Season’s Greetings from Quark – 10% discount til 7th Jan 2018!

New AIS Receiver QK-A027 with SeaTalk* Converter

Release date 31st October

QK-A027 AIS Receiver

with GPS, WiFi, NMEA out and SeaTalk in

 

Planned for release on October 31st, a new addition to the Marine Electronics Family.

A multi-functional little AIS engine it’s frankly, a game changer. It sits at the heart and hub of the whole navigation system as a single-unit powerhouse.

Building on the success of the previous models our new AIS Receiver adds SeaTalk capability to the already impressive suite of input options on the QK-A026 and is powered from the SeaTalk interface to provide a cleaner signal which will improve range and sensitivity.

Another innovation is simultaneous WiFi, NMEA and USB output. Considerably improving on versatility and flexibility.

The integral WiFi can connect up to seven devices and in response to customer feedback the GPS is now optional.

All this functionality comes in our trademark compact aluminium enclosure with the usual 1 year guarantee and is available exclusively to our Distributors at the same ridiculously low price as the QK-A026 until Jan 2018.

Full specification and instruction documents are on the website now and for further information please email me, kit@quark-elec.com.

Available until 1st Jan 2018 exclusively to Distributors

* SeaTalkTM is the proprietary protocol used by Raymarine Marine Electronics

Another super review for QK-A026

A great review from Erkki on Tindie

Very, very good all in one GPS + AIS receiver!

This little box contains all you can wish for, real dual channel AIS receiver,
a really good GPS receiver, all sorts of connectivity, from old school RS232
to USB and WIFI !
So you can connect it to everything very easily.
Power is easy just connect it to a USB port and all the fun wakes up very fast.
And all this for a very good price !
I will prolly order one extra as backup :-)If you are even remotely interested in AIS and /or GPS, get one !
it doesn’t get easier or cheaper than this.

Thanks Erkki! We’re very glad you like it!

Which Application should I use with my Quark-Elec AIS Receiver?

A question we get asked a lot!  There are an ever increasing number of Apps out there now, some good, some….less so.  We could go out and test every single one, but then we wouldn’t have time to do the R&D which drives our products forward.  We love the R&D part of our job, so we’ve put together a shortlist of applications which we know work and that cover most of the OS requirements out there. As you probably know by now, we like to encourage feedback and we love that our customers like to help each other out once in a while, so if you are using an app that isn’t listed here and you think it’s good, please give it a quick write up in the comments section.  Or drop me an email and point me in the right direction!

Erratum: OpenCPN does NOT have an iOS version.

 

Quick reference chart for Navigation Apps

Quick reference chart for Navigation Apps

Quick Reference Chart for WiFi Remote Controllers

Another easy comparison chart, this time for WiFi remote controllers.

Find out more:

Wifi Remote Controllers

Special Offer this Month:

QK-W015 Smart Wifi remote control module/Switch From Internet with Power plug and Three RF Power Sockets

Or our other models:

Online Mall

QK-W017 WiFi Remote Control Gateway – WiFi temperature/humidity data logger & remote controller

This week we have launched a new addition to our WiFi Remote Control Family.

Have complete control over your environment even when you aren’t there by fitting the QK-W017 wherever temperature and humidity are critical issues.

The base unit, or Gateway, communicates with up to 5 QK-S001 Sensor Units. These can monitor temperature, humidity or both and respond to preset limits by switching connected electronic devices on or off.  It must be paired with at least one S001 and can’t be used as a stand-alone-device.

Maintain energy efficiency at all times.

Upper and lower limits can be set independently for temperature and humidity so that the connected relay can operate the relevant electronic device when the parameters reach a set point.

Convenient access on the go.

Android or iOS handheld devices such as phones or tablets  can operate and monitor the W017 through an existing wireless access point (router)making it accessible over the internet from anywhere in the world (with a signal).  It also works locally in Ad Hoc or p2p mode.

Straightforward control  with a simple to use APP

After a  simple, rapid set-up you can be receiving data and controlling electronic devices within minutes, in up to five discrete zones.  The data can be logged and easily downloaded to the phone or tablet and opened for further analysis using the File Explorer. (It cannot as yet be directly exported to PC).

Change the APP labels to suit.

Each zone can be re-named with a unique label to instantly identify it, such as ‘garage’ or ‘fridge 1’ and can be changed whenever needed. Individual zones may be instantly monitored in real-time by clicking on their zone name on the Terminal Check page.

Change your mind.

Relay trigger points can be manually overridden at any point for instant operation of attached devices.  So if the temperature trigger is set for 17C to turn a heater on but it could do with a quick boost, just click and it’s done.

Detailed operating instructions are available at: http://www.quark-elec.com/manuals

Answers to frequently asked questions may be found on our forum at:

http://www.quark-elec.com/forum/viewforum.php?f=2&sid=da7e6b6f235be086c363ea248b52bd54

Buy now at:

http://www.quark-elec.com/onlinemall/index.php?route=product/product&product_id=88

Another Great Review for the QK-A031 Multiplexer

Test QK-A031 NMEA

The multiplexer is of quality and its price is incomparable! Commissioning is easy without having to load the interface for PC or Mac operation. The wifi works very well and especially, it allows several addresses at the same time on all platforms, PC, Mac, IIOS, Andro, Linux …. The must is the possibility to adjust the flow rate on all Inputs and outputs so as to be in phase with the AIS at 38500 Baud and the NMEA at 4800 Baud for seaTalk for example. Ultimately, the most would be to have NMEA 2000 … but to date the QK-A031 is of the best in NMEA183!

The original review in French:

Test QK-A031 NMEA en français

Le multiplexeur est de qualité et son prix est incomparable! La mise en service s’effectue sans difficulté à condition d’avoir chargé l’interface pour le piloter en PC ou en Mac. Le wifi marche très bien et surtout, il autorise plusieurs adresse en même temps sur toutes les plateformes, PC, Mac, IIos, Andro, Linux…. Le must c’est la possibilité d’ajuster au mieux le débit sur toutes les entrées et sorties de façon à être en phase avec l’AIS à 38500Bauds et du NMEA à 4800Bauds pour le seaTalk par exemple. A terme, le plus serait d’avoir du NMEA 2000… mais à ce jour le QK-A031 est de ce qui se fait de mieux en NMEA183!

You can find this review on

Tindie logo