no GPS data from A026 in OpenCPN

Quark-elec AIS receiver and NMEA MUX products questions

no GPS data from A026 in OpenCPN

Postby IgnatBr » Thu Aug 24, 2017 11:07 am

Hello,
I am trying yo get the GPS positioning for my OpenCPN (on Win 10) through A026 with a gps antenta, but could not.

The device connected via USB, ant the Hyper Terminal shows the flow of gps data.
$GPGGA,,,,,,0,00,99.99,,,,,,*48
$GPGSV,1,1,00*79
$GPGLL,,,,,,V,N*64
$GPGST,,0.0000,,,,3750073,3750073,3750073*7C
$GPZDA,,,,,00,00*48
$GPRMC,,V,,,,,,,,,,N*53
$GPVTG,,,,,,,,,N*30

but no data appear in OpenCPN where I configured the connection on com port.

(I had to install the drivers for the device despite it had to be plug-n-play on Win 10)

Many thanks in advance,
IgnatBr
 
Posts: 3
Joined: Wed Jul 19, 2017 3:34 pm

Re: no GPS data from A026 in OpenCPN

Postby admin » Thu Aug 31, 2017 10:27 am

To help us investigate the issue can you please let us know have you get AIS messages on OpenCPN? If not, then the issue should be related to the setting on OpenCPN.
Thanks.
User avatar
admin
Site Admin
 
Posts: 326
Joined: Tue May 13, 2014 2:50 pm


Return to Marine Electronics(AIS/NMEA MUX)

Who is online

Users browsing this forum: No registered users and 1 guest

cron