QK-A022 Installation

Quark-elec AIS receiver and NMEA MUX products questions

QK-A022 Installation

Postby Grayling » Thu Aug 24, 2017 11:05 am

Have just plugged in a new A022 into a Windows 10 64 Bit tablet and the Device Manager shows the device under "Other Devices" and STM32F4-Discovery in FS Mode. Properties displays Code 28 "Drivers for this device are not installed".

It also appears under Ports (COM5) and properties "This device can not start (Code 10).

Any suggestions please.
Grayling
 
Posts: 2
Joined: Thu Aug 24, 2017 9:36 am

Re: QK-A022 Installation

Postby admin » Tue Aug 29, 2017 10:08 am

Hi Grayling,
there are several previous post on this issue, for example have you had a chance to look at this one? viewtopic.php?f=3&t=9901
hope that helps,
User avatar
admin
Site Admin
 
Posts: 308
Joined: Tue May 13, 2014 2:50 pm

Re: QK-A022 Installation

Postby Grayling » Wed Aug 30, 2017 4:37 pm

Hi

I had seen that thread.

It refers to a download from Quark website. But that is for non Windows 10.

I have the same error reported on both my new tablet and my desktop both running Windows 10.

Ideas please
Grayling
 
Posts: 2
Joined: Thu Aug 24, 2017 9:36 am

Re: QK-A022 Installation

Postby admin » Thu Aug 31, 2017 10:10 am

User avatar
admin
Site Admin
 
Posts: 308
Joined: Tue May 13, 2014 2:50 pm


Return to Marine Electronics(AIS/NMEA MUX)

Who is online

Users browsing this forum: No registered users and 1 guest

cron