QK-A023 connecting to openCPN 4.4 on mac OSX 10.10

Quark-elec AIS receiver and NMEA MUX products questions

QK-A023 connecting to openCPN 4.4 on mac OSX 10.10

Postby poachedegg » Fri Aug 04, 2017 4:31 pm

Hi,
I am having problems finding the data port for my QK-A023 in connections in OpenCPN. I have the QK-A023 connected by USB and the Macbook pro running Yosemite 10.10.5 sees it using command ls /dev/*usb* but there is no data port available when trying to add connection in OpenCPN. Your help would be much appreciated.
poachedegg
 
Posts: 1
Joined: Fri Aug 04, 2017 3:50 pm

Re: QK-A023 connecting to openCPN 4.4 on mac OSX 10.10

Postby admin » Mon Aug 07, 2017 10:23 am

Hi poached egg,

please send photos/screenshots of what it is you are trying to do so that we can assess what is actually happening to kit@quark-elec.com
Thanks
User avatar
admin
Site Admin
 
Posts: 308
Joined: Tue May 13, 2014 2:50 pm

Re: QK-A023 connecting to openCPN 4.4 on mac OSX 10.10

Postby admin » Wed Aug 16, 2017 9:19 am

Hi
you need to change your baud rate to 38400, it's under parameters
hope that helps!
User avatar
admin
Site Admin
 
Posts: 308
Joined: Tue May 13, 2014 2:50 pm


Return to Marine Electronics(AIS/NMEA MUX)

Who is online

Users browsing this forum: No registered users and 1 guest

cron