QK-G022 problem no action on relays

Any questions about our QK-Gxx series products can be post here, our technical team will reply you.

QK-G022 problem no action on relays

Postby Peter Jocos » Wed May 31, 2017 9:11 am

QK-G22, RMODE IS 'INCH1INCH2', when I activate relay 1 or 2 the relay does nothing and I get this text 'External trigged' No action on relays.
Peter Jocos
 
Posts: 8
Joined: Mon Dec 05, 2016 11:45 am

Re: QK-G022 problem no action on relays

Postby admin » Wed May 31, 2017 9:32 am

Hi,
This means the relays are set on Latching mode (active for a while and then back to normal status). If the delay time was set very short (e.g. 3 seconds), it may be working without you being able to detect it. Try setting the interval longer.
Hope that helps
User avatar
admin
Site Admin
 
Posts: 252
Joined: Tue May 13, 2014 2:50 pm


Return to GSM remote controller products

Who is online

Users browsing this forum: No registered users and 1 guest

cron