Another easy comparison chart, this time for WiFi remote controllers.
This week we have launched a new addition to our WiFi Remote Control Family.
Have complete control over your environment even when you aren’t there by fitting the QK-W017 wherever temperature and humidity are critical issues.
The base unit, or Gateway, communicates with up to 5 QK-S001 Sensor Units. These can monitor temperature, humidity or both and respond to preset limits by switching connected electronic devices on or off. It must be paired with at least one S001 and can’t be used as a stand-alone-device.
Maintain energy efficiency at all times.
Upper and lower limits can be set independently for temperature and humidity so that the connected relay can operate the relevant electronic device when the parameters reach a set point.
Convenient access on the go.
Android or iOS handheld devices such as phones or tablets can operate and monitor the W017 through an existing wireless access point (router)making it accessible over the internet from anywhere in the world (with a signal). It also works locally in Ad Hoc or p2p mode.
Straightforward control with a simple to use APP
After a simple, rapid set-up you can be receiving data and controlling electronic devices within minutes, in up to five discrete zones. The data can be logged and easily downloaded to the phone or tablet and opened for further analysis using the File Explorer. (It cannot as yet be directly exported to PC).
Change the APP labels to suit.
Each zone can be re-named with a unique label to instantly identify it, such as ‘garage’ or ‘fridge 1’ and can be changed whenever needed. Individual zones may be instantly monitored in real-time by clicking on their zone name on the Terminal Check page.
Change your mind.
Relay trigger points can be manually overridden at any point for instant operation of attached devices. So if the temperature trigger is set for 17C to turn a heater on but it could do with a quick boost, just click and it’s done.
Detailed operating instructions are available at: http://www.quark-elec.com/manuals
Answers to frequently asked questions may be found on our forum at:
Buy now at:
You can see it here:
The QK-G025 module is an industrial grade product which is designed to provide remote control of pumps, valves and pipelines. As it can work in two modes, Dead Man and Timed Pulse, it can be used for a wide variety of remote applications. The two alarm inputs provide another mechanism for automatic remote monitoring and can act as either switches or input sources, ensuring your liquid/gas transit or storage system is entirely controllable from wherever the operator needs to be. The inputs can be from a wide variety of sensors, e.g. photocell receivers, CO2 monitors, leak detectors etc.
As you can set the QK-G025 up without a PC, it is easy to install in remote locations, you just need a power supply, a registered SIM and a phone signal. Access can be granted to up to four numbers, and incoming calls from any other number will be disregarded so your controller is secure from outside interference. In addition to controlling your system automatically or remotely, it can be interrogated by SMS for status updates. As the unit works on number recognition, the call is never answered thus the system is Toll free in use.
- Secure, uses caller ID for identification, unknown callers are ignored.
- Alarm inputs for automated control.
- Dual working modes, ‘Dead Man’ and time pulsed for remote operation.
- Easy to install and configure (no PC required).
- Up to 4 mobile phones per unit.
- Request status via SMS.
- Compatible with all major GSM SIM networks.
- Tri-band GSM for use in Europe & USA.
This new video gives a guided tour of the Quark-elec QK-W016 Remote Control Temperature Data Logger and runs through resetting the module and setting up in Station Mode. The new video goes through the processes step-by-step and includes a software view with a hardware view so that you can see exactly how the unit responds to setting up and use. For those that are interested, the music is Orlando Gibbon’s Fantasia and is played by Jon Sayles.
It has always been a challenge to remotely monitor the liquid levels of a tank. This unit rises to that challenge by monitoring levels and also adjusting them by remotely actuating the intake and outflow valves. The QK-G021 provides a perfect remote tank monitor and control system. The system continuously monitors levels to ensure reliable ongoing operation and instantly triggers the valves should the liquid levels exceed the preset limits. It simultaneously sends an alert SMS to the operators to alert them when this occurs.
• Automatically switches on/off when liquid levels breach preset limits.
• Supports remote manual on/off switching.
• Sends an SMS when alarm has been triggered.
• Three independent ‘interrupt’ relay outputs. One dedicated to tank filling operations, the remaining two can be assigned to door or gate operation, cctv systems, warning sirens, or air conditioning etc..
QK-G021G GSM remote controller is an automotive class module which has an built-in GPS receiver. Using the latest GSM communications technology QK-G021G offers operators the opportunity to check the position/speed of vehicles remotely. It also allows operators to activate/de-activate the central door locking, as well as other components on the vehicle, like engineer motors.
• Doors can be activated/locked from anywhere on the planet.
• Switch the engine on/off and immobilize remotely by SMS.
• Track routes and locations of vehicles and display them on google maps.
• Sends SMS message when alarm has been triggered.
AC motors are widely used and a vital controlling device in the field of industrial automation. Most manufacturing industries, continuous production units, chemical industries, textile mills, agricultural devices, pharmaceutical industries are now equipped with various AC motors. The QK-G021 is a core unit to provide a motor control solution allowing for the operation of the AC motor either manually, remotely or automatically.
The QK-G021 has three independent relays, two with timers which can be set for on/off time. Two digital alarm inputs can be connected with various sensors to monitor temperature, pressure, weight, humidity, ingredients, position, light levels, etc. Relays will take action and send out an alarm message (SMS) when the sensors are triggered. Up to 4 authorized operators can control and monitor the AC motor working conditions remotely.
QK-R021/022 series remote controller is an easily installed device which can control electric doors, curtains/blinds, and other DC motor driven devices in smart houses, for industrial controls, and for the security of industrial areas. The doors can be operated by the supplied remote control, which also signals the DC motor driven device to turn on or off on demand.
More information about the product can be found here.