QK-W017 WiFi Remote Control Gateway – WiFi temperature/humidity data logger & remote controller

This week we have launched a new addition to our WiFi Remote Control Family.

Have complete control over your environment even when you aren’t there by fitting the QK-W017 wherever temperature and humidity are critical issues.

The base unit, or Gateway, communicates with up to 5 QK-S001 Sensor Units. These can monitor temperature, humidity or both and respond to preset limits by switching connected electronic devices on or off.  It must be paired with at least one S001 and can’t be used as a stand-alone-device.

Maintain energy efficiency at all times.

Upper and lower limits can be set independently for temperature and humidity so that the connected relay can operate the relevant electronic device when the parameters reach a set point.

Convenient access on the go.

Android or iOS handheld devices such as phones or tablets  can operate and monitor the W017 through an existing wireless access point (router)making it accessible over the internet from anywhere in the world (with a signal).  It also works locally in Ad Hoc or p2p mode.

Straightforward control  with a simple to use APP

After a  simple, rapid set-up you can be receiving data and controlling electronic devices within minutes, in up to five discrete zones.  The data can be logged and easily downloaded to the phone or tablet and opened for further analysis using the File Explorer. (It cannot as yet be directly exported to PC).

Change the APP labels to suit.

Each zone can be re-named with a unique label to instantly identify it, such as ‘garage’ or ‘fridge 1’ and can be changed whenever needed. Individual zones may be instantly monitored in real-time by clicking on their zone name on the Terminal Check page.

Change your mind.

Relay trigger points can be manually overridden at any point for instant operation of attached devices.  So if the temperature trigger is set for 17C to turn a heater on but it could do with a quick boost, just click and it’s done.

Detailed operating instructions are available at: http://www.quark-elec.com/manuals

Answers to frequently asked questions may be found on our forum at:

http://www.quark-elec.com/forum/viewforum.php?f=2&sid=da7e6b6f235be086c363ea248b52bd54

Buy now at:

http://www.quark-elec.com/onlinemall/index.php?route=product/product&product_id=88

Another Great Review for the QK-A031 Multiplexer

Test QK-A031 NMEA

The multiplexer is of quality and its price is incomparable! Commissioning is easy without having to load the interface for PC or Mac operation. The wifi works very well and especially, it allows several addresses at the same time on all platforms, PC, Mac, IIOS, Andro, Linux …. The must is the possibility to adjust the flow rate on all Inputs and outputs so as to be in phase with the AIS at 38500 Baud and the NMEA at 4800 Baud for seaTalk for example. Ultimately, the most would be to have NMEA 2000 … but to date the QK-A031 is of the best in NMEA183!

The original review in French:

Test QK-A031 NMEA en français

Le multiplexeur est de qualité et son prix est incomparable! La mise en service s’effectue sans difficulté à condition d’avoir chargé l’interface pour le piloter en PC ou en Mac. Le wifi marche très bien et surtout, il autorise plusieurs adresse en même temps sur toutes les plateformes, PC, Mac, IIos, Andro, Linux…. Le must c’est la possibilité d’ajuster au mieux le débit sur toutes les entrées et sorties de façon à être en phase avec l’AIS à 38500Bauds et du NMEA à 4800Bauds pour le seaTalk par exemple. A terme, le plus serait d’avoir du NMEA 2000… mais à ce jour le QK-A031 est de ce qui se fait de mieux en NMEA183!

You can find this review on

Tindie logo

 

QK-A031 NMEA 0183 Multiplexer with SeaTalk Converter and Station Mode

One of the big bugbears of this brave new world of technological marvels is cross-compatibility.  Many customers have said to us, ‘If only it would connect with my Raymarine’

No longer! We have solved this long-standing annoyance.  Our solution:

QK-A031 NMEA 0183 Multiplexer with SeaTalk Converter

Able to receive input in NMEA and SeaTalk formats this unit can interface between your existing Raymarine instruments by converting SeaTalk to NMEA and combining the four channels of data for output via the NMEA wired output port, WiFi and USB simultaneously.

As the SeaTalk system operates on a single cable ‘daisy chain’ only one input port is required to give an effective interface into the NMEA network.

This allows all of your Raymarine telemetry to be utilised by plotters and AIS units that would normally be incompatible. It can also feed directly to a plotter program on PC or tablet via WiFi from anywhere on the vessel.  Finally you can navigate from your berth! (Though we absolutely do not suggest that you do that!).

The new version A031 (available from July 2017) offers both AdHoc and Station operating modes for even more flexibility, so you can connect peer-to-peer or through a router.

This enables remote access in addition to better range for larger vessels. SSID names and passwords are able to be easily changed at any time for security.  Initial configuration is through the USB port which can also be used for NMEA output.

 

 

The  QK-A031 is currently a receive only solution, but we’re working on that………

 

Find more details on the QK-A031 at: http://www.quark-elec.com/products/marine/148-qk-a031

and here: http://www.quark-elec.com/doc/QK-A031_application_note.pdf

 

Buy QK-A031 here: http://www.quark-elec.com/onlinemall/index.php?route=product/product&product_id=86

 

QK-A031 Now Supports Station Mode

We always like to improve our products as we receive feedback from users so the new stock, available now, supports Station Mode:

as well as Ad hoc Mode:

This means you will be able to access the multiplexer remotely from anywhere on (or even off!) the vessel using a single AP or router, as well as connecting directly to it with your phone or tablet.

Another cracking review for the QK-A021, this time from Spain!

A lovely review from Alfonso in Spain, see it in the original Spanish on our Tindie outlet 

   

Hi. I do not speak English, so I’ll say it in Spanish, which is my language.
I am delighted with AIS Receiver Google usb, it works perfectly, sometimes even without having connected the antenna. Shipping was fast. The price very, very good.

Thanks Alfonso! We’re glad you like it